Baby Jogger Car Seat Adapters: 18 SKUs Explained

Information Verified Through Official Sources · Checked Nov 1, 2026

Start with the Car Seat Adapter Finder if you want the full stroller-to-seat matrix, then use this page to sort Baby Jogger’s adapter line one SKU at a time. The 2025 chart is the source boundary here, so each fit call stays tied to what Baby Jogger lists for its own strollers and infant car seats.

Baby Jogger Car Seat Adapters

For Baby Jogger strollers including the City Select 2: one adapter per stroller-and-seat-brand combination, from the 2025 list.

18 SKUs

Source: Baby Jogger 2025 Infant Car Seat Compatibility List (PDF), babyjogger.com · Checked Nov 1, 2026

That matters because Baby Jogger sells one of the largest adapter lines in the counted dataset, with 18 SKUs to sort through. For shoppers comparing a stroller already in hand against a seat they want to buy, the SKU count is the difference between a quick match and a wrong checkout.

This guide keeps not listed separate from does not fit, and it treats each adapter as a specific part, not a general promise. If you are comparing Baby Jogger against other systems, see the related stroller-side charts for Thule’s adapter families and interface types and BOB’s brand-block adapter system for a different way brands split the same problem.

What Baby Jogger’s 2025 Adapter Chart Covers

Baby Jogger’s 2025 adapter chart is the source for this page, along with the related manufacturer pages that name the stroller and seat pairings. I’m keeping each SKU separate, so a single family name does not blur different fit rules into one claim.

The site uses four verdict labels: fits, fits with named adapter, does not fit, and not listed. That split matters here because the chart is the only place where the adapter SKU, stroller model, and infant seat brand are tied together.

This page stays focused on the adapter line itself, not on stroller-only compatibility claims. If you are comparing brands, the same method also appears in pages like Thule’s adapter families and interface types, but this section only sets the Baby Jogger source boundary.

The Adapter Families Baby Jogger Uses

Baby Jogger splits its adapter line into charted families, so the first job is to separate stroller-specific pieces from the broader interface adapters. That keeps a shopper from treating every SKU like the same part.

Some SKUs are built for one stroller model or one stroller series, while others cover a wider stroller base and then pair with a named car seat brand or model. The chart treats those as different products, even when the retail copy tries to blur them together.

The cleanest way to read the line is by function first, then by fit. That is the same logic used across this site, including the broader Car Seat Adapter Finder hub and the stroller-specific pages for the City Select 2.

If you are comparing Baby Jogger against other brands, that split matters. It is also the point where a shopper may start comparing how Baby Jogger’s grouping differs from Thule’s adapter families and interface types, BOB’s brand-block adapter system, or Mockingbird’s adapter variants and setup rules.

SKU-by-SKU Fit Table

Baby Jogger’s 2025 chart breaks the line into named SKUs, so the safest way to read it is one adapter at a time. Some are stroller-specific, some are brand-interface pieces, and the chart keeps those separate from any not listed result.

For the City Select 2 family, the chart points shoppers to the stroller-specific adapter route rather than a broad universal claim. That is the same kind of split you see in the city-specific compatibility pages, including the City Select 2 compatibility chart and the verified Graco pair page for the SnugRide.

The seat-brand names matter as much as the stroller names. Where Baby Jogger names a seat brand or model on the chart, that is the only fit claim this page carries; where it does not name a pair, the result stays not listed instead of being treated as a miss.

A few SKUs also carry setup notes, such as which stroller seat position to use or whether the adapter is meant for a single infant seat only. Those notes are part of the fit record, and they matter when a stroller can take more than one adapter path. For shoppers comparing brands, that is the same sort of adapter logic discussed in what counts as a travel system and when an adapter is required.

Position Notes, Canopy Notes and Other Setup Limits

Baby Jogger calls out a few setup limits that matter after you pick the right SKU. Some adapters are tied to the upper or lower position on a given stroller frame, so the chart’s position note is part of the fit, not an extra detail.

If the chart says a canopy must come off, or that a seat has to face a certain way, treat that as part of the adapter rule. The same is true for fold limits, since the adapter can change how the stroller closes even when the pair is listed.

That means the adapter can be the limiting piece even when the stroller and seat are both on the approved list. If you are comparing Baby Jogger against other systems, the setup notes here play the same role as the adapter notes in Thule’s adapter families and interface types and the brand-block rules in BOB’s brand-block adapter system.

Use the note attached to the SKU, not a general stroller rule, when the chart gives both. That keeps you from reading a model-wide limit as a limit for every adapter Baby Jogger sells.

How to Read a Baby Jogger Verdict Before You Buy

Start with your stroller model and generation, then match it to the Baby Jogger chart entry before you look at any adapter SKU. The same name can cover more than one frame, so the exact stroller matters.

Next, match the infant seat family to the chart entry, then verify the exact SKU on the adapter page. If you are comparing another brand’s setup, the same rule applies in the city-select style pages and in guides like Thule’s adapter families and interface types, because the final fit still comes down to the listed pair.

If you do not see your stroller and seat together, treat that as not listed, not as a guess that it fails. That keeps you from buying the wrong adapter when the chart simply does not name your pair.

If you want the full stroller-to-seat matrix, go back to the Car Seat Adapter Finder and then compare this page with the Baby Jogger stroller compatibility hub. That keeps the adapter SKU list tied to the stroller model you own, instead of treating every Baby Jogger setup as the same.

For brand-to-brand comparisons, the closest match pages are the related adapter guides for Thule’s adapter families and interface types, BOB’s brand-block adapter system, and Mockingbird’s adapter variants and setup rules. They use the same source-first format, so you can compare how each brand handles adapter parts and setup limits.

Every verdict on this site carries a source and a last-checked date. If a stroller or seat is not named on the chart, treat that as not listed until you confirm it on the manufacturer page.

Every Baby Jogger Adapter, by Part Number

Each adapter below has its own page with the strollers it fits, the seats it carries, and the source behind the verdict — the 2025 compatibility chart, the product page, or both.

Baby Jogger Adapter 2170584: Graco Seats for City Sights
City Sights · Graco and City GO
Adapter Page
Baby Jogger Adapter 2170585: Britax Seats for City Sights
City Sights · Britax (chart only)
Adapter Page
Baby Jogger Adapter 2170586: Maxi-Cosi and Nuna Seats for City Sights
City Sights · Maxi-Cosi and Nuna (chart only)
Adapter Page
Baby Jogger Adapter 2170588: Chicco Seats for City Sights
City Sights · Chicco
Adapter Page
Baby Jogger Adapter 1967362: Graco Seats for City Select, Select 2 and Select LUX
City Select family · Graco and City GO
Adapter Page
Baby Jogger Adapter 2151253: Britax Seats for City Select 2
City Select 2 · Britax
Adapter Page
Baby Jogger Adapter 1967361: Chicco and Peg Perego Seats for City Select, Select 2 and Select LUX
City Select family · Chicco and Peg Perego
Adapter Page
Baby Jogger Adapter 2013551: Maxi-Cosi and Cybex Seats for City Select, Select 2 and Select LUX
City Select, Select 2 and Select LUX · Maxi-Cosi and Cybex (legacy part, product page only)
Adapter Page
Baby Jogger Adapter 2083981: Graco Seats for City Mini GT2 and City Elite 2
City Mini GT2 and City Elite 2 · Graco (chart only)
Adapter Page
Baby Jogger Adapter 2083982: Maxi-Cosi and Nuna Seats for City Mini GT2 and City Elite 2
City Mini GT2 and City Elite 2 · Maxi-Cosi and Nuna (chart only)
Adapter Page
Baby Jogger Adapter 2083994: Chicco Seats for City Mini 2, City Mini GT2 and City Elite 2
City Mini 2, GT2 and Elite 2 · Chicco and Peg Perego
Adapter Page
Baby Jogger Adapter 2104668: Graco Seats for City Mini 2 Double and City Mini GT2 Double
City Mini 2 Double and GT2 Double · Graco and City GO
Adapter Page
Baby Jogger Adapter 2104669: Maxi-Cosi and Nuna Seats for City Mini 2 Double and City Mini GT2 Double
City Mini 2 Double and GT2 Double · Maxi-Cosi and Nuna
Adapter Page
Baby Jogger Adapter 1971511: Graco Seats for Summit X3
Summit X3 · Graco
Adapter Page
Baby Jogger Adapter 2194987: Graco Seats for Summit X3 Double
Summit X3 Double · Baby Jogger and Graco (product page only)
Adapter Page
Baby Jogger Adapter 2216846: Nuna Seats for City Mini GT3
City Mini GT3 · Nuna
Adapter Page
Baby Jogger Adapter 2212243: Nuna Seats for City Mini Air
City Mini Air · Nuna
Adapter Page
Baby Jogger Adapter 2082703: Graco Seats for City Tour 2
City Tour 2 · Graco and City GO
Adapter Page

Two adapters on the chart are not sold separately at all. The chart marks the City GO and Graco adapters for the city mini GT3 and the city mini air “In Box”: they ship with the stroller, so they have no part-number page here.

Conclusion

A Baby Jogger setup is settled only when the stroller, the infant seat, and the exact adapter SKU line up in the 2025 chart. If one of the three does not match a named entry, do not treat a close family name or a similar-looking part as a substitute.

Check the source and last-checked date on the verdict for your pair before you buy, and keep a missing entry as not listed until Baby Jogger names it. That pause costs less than ordering the wrong adapter and finding out at install.