BOB Adapter S12045400: Graco SnugRide Seats for Single Strollers

Information Verified Through Official Sources · Checked Nov 1, 2026

BOB adapter S12045400 is the official Single Jogging Stroller Adapter for Graco Infant Car Seats. If you are checking fit before you buy, start with the full adapter finder and then confirm your stroller against BOB's chart, because the Product ID prefixes are not published legibly.

BOB Gear Car Seat Adapter S12045400

BOB Gear Car Seat Adapter S12045400, part S12045400

For the Alterrain; Alterrain Pro; Blaze; Rambler; Revolution Flex 2016+/2.0/3.0; Revolution Pro 2016+; Stroller Strides 2016+: carries All SnugRide models, SnugRide Click Connect models, SnugRide SnugLock models.

Model S12045400
Get the BOB Gear Adapter S12045400

We may earn a commission if you buy through this link. It never changes the verdict.

Source: BOB Gear adapter product pages and official charts, bobgear.com · Checked Nov 6, 2026

BOB lists this adapter for Alterrain, Alterrain Pro, Blaze, Rambler, Revolution Flex 2016+/2.0/3.0, Revolution Pro 2016+, and Stroller Strides 2016+. It carries one infant car seat, and BOB's product page says it works with all SnugRide models, SnugRide Click Connect models, and SnugRide SnugLock models.

Before you buy, match your stroller's Product ID to BOB's chart, since the prefix strings are not shown in a clean readable format. If your stroller is not on that list, or your seat is outside the SnugRide families BOB names here, do not assume this adapter fits.

What S12045400 Is

BOB adapter S12045400 is the official Single Jogging Stroller Adapter for Graco Infant Car Seats. It is the part parents need when they want to carry one infant car seat on a compatible BOB single stroller.

This is a single-stroller adapter, so its job is narrow. It carries one infant car seat, and BOB publishes the fit chart separately from the part name. If you are comparing BOB parts, BOB’s adapter family overview is the broader place to see the other single-stroller adapter SKUs.

For this page, the only verified purpose is the Graco infant-seat connection for one seat at a time. The stroller model list and the seat-family list come next, so this section stays on the SKU itself and what it does.

Which BOB Strollers It Fits

BOB lists these single stroller models for S12045400: Alterrain, Alterrain Pro, Blaze, Rambler, Revolution Flex 2016+/2.0/3.0, Revolution Pro 2016+, and Stroller Strides 2016+. If you are comparing BOB parts, you can cross-check this against BOB’s adapter family overview for the broader SKU set.

The fit list is model-specific. BOB names the Alterrain and Alterrain Pro together, then the Blaze and Rambler together, then the Revolution Flex 2016+/2.0/3.0 group, plus Revolution Pro 2016+, and Stroller Strides 2016+.

If your stroller is one of those models, this section is the right match for the frame side of the adapter. If it is a different BOB stroller, do not assume it fits just because it is a BOB single stroller; check the chart BOB publishes for the exact Product ID.

For readers comparing neighboring BOB parts, the model list here is separate from the other single-stroller adapter pages, including the Chicco single-stroller adapter and the combined Cybex, Maxi-Cosi and Nuna adapter. Those pages cover different stroller-seat pairings, so use the model name on the adapter page before buying.

Which Graco SnugRide Seats It Carries

BOB says S12045400 carries these Graco infant car seat families: all SnugRide models, SnugRide Click Connect models, and SnugRide SnugLock models. That is the full seat coverage on the product page, and it is limited to one infant car seat.

If you are comparing BOB parts, this is the same adapter family that sits inside BOB’s adapter family overview. For seat-side fit, stay with the three official Graco family groupings above and do not assume coverage beyond them.

BOB does not publish extra model names in this listing, so there is no verified seat list beyond those family labels. If you own a Graco seat and need a broader brand-side check, use the Graco SnugRide brand hub for the matching stroller-side pages.

The adapter page also does not add any second seat position or double-seat setup. It is a single-stroller adapter that carries one infant car seat, and that is the only configuration BOB states here.

What It Does Not Fit or Cover

This page stays narrow. It covers only what BOB publishes for adapter S12045400, and it does not add any broader cross-brand claim from retailer copy or from similar-looking part numbers.

Do not read more into the fit than the chart gives you. If your stroller is not one of the named BOB models, or your seat is not one of the named SnugRide groups, this page does not confirm it, and the same caution applies to the broader BOB single-stroller compatibility hub.

That boundary matters because adapter names can look close while the actual fit can differ. For BOB gear, use the published chart only, and if you are comparing parts, start with BOB’s adapter family overview before you assume a match.

How to Confirm the Right BOB Stroller Before Buying

Before you buy, match your stroller’s Product ID against BOB’s chart. BOB says the prefix strings are not published legibly, so the chart check is the only safe way to confirm the right stroller.

That check matters because S12045400 is only the adapter BOB lists for the stroller models and seat families named on this page. If your stroller is not on that chart, do not assume the adapter will fit.

If you are comparing BOB parts, use BOB’s adapter family overview for the other single-stroller adapter SKUs, then come back to this exact part number. The same source discipline applies to the broader BOB single-stroller compatibility hub and the Graco SnugRide brand hub, which should be used only as reference pages, not as a substitute for the Product ID match.

Frequently Asked Questions

What If My BOB Stroller Is Not One of the Models Listed for ≪code Class="cx">S12045400?

BOB does not publish a fit for it under this SKU. Match your Product ID against BOB's chart before buying, and do not treat a retailer listing as confirmation.

Does It Work with a Graco Car Seat That Is Not a SnugRide?

BOB's product page for this adapter names only SnugRide, SnugRide Click Connect, and SnugRide SnugLock models. A seat outside those groupings is not listed for this SKU.

Can It Hold Two Infant Car Seats at the Same Time?

No. It is a single stroller adapter and carries one infant car seat.

Conclusion

If both halves match BOB's published scope, S12045400 is the part to order. If either half falls outside that scope, stop and match your Product ID against BOB's chart on bobgear.com before buying, rather than relying on a retailer listing or a similar part number. These facts come from BOB Gear at bobgear.com, checked November 6, 2026.

Parents whose seat is not a Graco SnugRide need a different SKU, such as the Chicco single-stroller adapter for a Chicco seat or the combined Cybex, Maxi-Cosi and Nuna adapter for those brands. Keeping each BOB adapter tied to its named seat brand is what keeps the fit claim exact.

Related Reading