That means the supported two-child setup is one infant car seat up top and the stroller seat below. The chart does list upper-mount adapters for specific seats, but it does not list a lower-mount car seat adapter for this stroller, so there is no verified way to mount a second infant seat underneath.
If you already own part of the setup, the next step is to match the exact adapter to the seat you have and keep the lower position for the stroller seat. Readers who need two infant seats at once should move to a stroller that is built to support that configuration, since the City Select 2 is not one of them.
- What the Official City Select 2 Chart Says About Two Car Seats
- Which Adapters and Seats the Chart Supports for the Upper Mount
- What Goes on the Lower Mount Instead
- What to Buy If You Already Own One Half of the Setup
- Common Mistakes with City Select 2 Two-Seat Setups
- Sources, Date Checked, and Where This Setup Fits in the Double-Stroller Cluster
- Frequently Asked Questions
- Conclusion
What the Official City Select 2 Chart Says About Two Car Seats
The verified answer is no: two infant car seats at once are not a supported setup on the City Select 2. Baby Jogger’s official 2025 chart limits a car seat to the upper seat mount only, so this stroller does not have a lower-mount car seat option to make a second infant seat work.
The chart footnote is the key line here: a car seat can only be attached to the upper seat mount on City Select 2, and no lower-mount car seat adapter exists for this stroller. That is the manufacturer rule this page follows, not a retailer guess or a general double-stroller assumption.
If you need the exact hardware for the one allowed position, see the full City Select 2 compatibility matrix and the adapter pages that go with it. For the two-child layout, the second position is the stroller seat, not a second car seat.
That is why the question here is about position, not just brand fit. The stroller can be used as a double, but the official chart does not support two infant car seats on it at the same time.
Which Adapters and Seats the Chart Supports for the Upper Mount
Baby Jogger’s chart gives three verified upper-mount options for the City Select 2, and each one is tied to a specific adapter part number. Use 1967362 for Graco SnugRide and City GO seats, 2151253 for Britax seats, and 1967361 for Chicco and Peg Perego seats.
That chart entry is a seat listing, not a guess. If a seat name appears in the official table, it is a verified fit for the upper mount with the named adapter, and if it is missing, it is simply not listed in the chart.
For parents comparing brands, the official list is narrower than the full City Select 2 compatibility matrix, and that is the point. It tells you which infant seats Baby Jogger documents for this stroller, while leaving out seats it does not name.
The chart also separates infant seat hardware from the second-seat hardware. The lower position uses the stroller-seat adapter set, not a car seat adapter, so the setup stays one infant seat up top and the stroller seat below, which is the same kind of split you see in how upper and lower adapter positions work on the Vista and how a single-to-double stroller handles two infant seats.
What Goes on the Lower Mount Instead
The lower mount on the City Select 2 is for the stroller's second seat, not a second infant car seat. So the two-child setup is one infant car seat up top and one child riding in the stroller seat below.
That is why Baby Jogger's second-seat adapter, part 2152438, is a seat adapter, not a car seat adapter. If you were comparing it with the upper-mount hardware, it helps to read the separate page for the adapter SKU that carries Graco and City GO seats on City Select 2 and the separate Britax adapter page for City Select 2, because those are the pieces that belong to the upper car seat position.
If you are trying to picture a different double-stroller layout, the closest comparison is how upper and lower adapter positions work on the Vista. For a single-to-double frame that also uses a lower seat, how a single-to-double stroller handles two infant seats shows a frame that does the opposite: both of its positions can carry an infant seat.
In plain terms, the lower mount is the toddler seat position. It does not turn the City Select 2 into a two-infant-seat stroller, and it does not change the chart rule that only the upper mount takes a car seat.
What to Buy If You Already Own One Half of the Setup
If you already own one half of the setup, start by checking the exact model name on the seat label or manual, then compare it with Baby Jogger's official 2025 chart. If your seat is one of the listed upper-mount models, you are shopping for the matching upper adapter, not a second car seat adapter.
For Graco or City GO, that means adapter 1967362. For Britax, it means 2151253. For Chicco or Peg Perego, it means 1967361.
If the missing piece is the lower position, buy the stroller seat hardware instead, because the lower mount is for the second stroller seat, not a car seat. That is the same mistake readers make when they confuse this chart with the two-seat logic in the how a single-to-double stroller handles two infant seats guide.
Before you order, match the stroller generation on the product page to the chart date and make sure you are looking at City Select 2, not City Select or City Select LUX. If your seat is not listed, treat it as unlisted until Baby Jogger publishes a chart line for it.
Common Mistakes with City Select 2 Two-Seat Setups
Don’t assume a second car seat can go on the lower mount. Baby Jogger’s chart limits a car seat to the upper seat mount only, so the lower position is not part of a two-infant-seat setup.
It’s easy to mix up the hardware. The second-seat adapter is for the stroller seat, not a car seat, and a single-seat verdict page does not prove a two-car-seat configuration is allowed.
Retail listings can be misleading because they often use family names instead of the exact setup on the chart. Old charts can confuse the issue too, so use the current Baby Jogger chart, not a retailer summary.
If you want a close parallel, see the BOB Duallie one-car-seat rule, where the maker also states a one-car-seat limit outright.
Sources, Date Checked, and Where This Setup Fits in the Double-Stroller Cluster
Sources for this setup are Baby Jogger's 2025 infant car seat compatibility chart and the matching adapter product pages, checked November 6, 2026. That chart is the basis for the City Select 2 answer in this double-stroller cluster.
If you need two infant car seats at once, move to the cluster roundup of double strollers that accept two, because this stroller does not support that setup. For related fit details on the same platform, see the sibling guides for the Vista and the Mockingbird.
This page sits beside those two-seat guides as the City Select 2 entry in the same double-configuration cluster. It keeps the answer narrow, sourced, and tied to the manufacturer chart rather than retailer listings.
Frequently Asked Questions
Can an Adapter Make the City Select 2 Hold Two Car Seats?
No. Baby Jogger lists no lower-mount car seat adapter for the City Select 2, and its 2025 chart limits a car seat to the upper seat mount only.
Does Second-Seat Adapter 2152438 Add a Second Car Seat Below?
No. That kit adapts the lower position for the stroller seat. It does not turn the lower mount into a second car seat position.
Conclusion
If you need two infant car seats on the stroller at the same time, the City Select 2 is the wrong choice, and no adapter purchase changes that. Baby Jogger's 2025 chart limits a car seat to the upper seat mount only, so plan on one car seat up top and the stroller seat below, or shop for a different double.
For twins or two infants close in age, start instead with models built and charted for two car seats, and check each seat against that stroller's own chart before you buy. That check keeps you from relying on a second-seat kit like 2152438, which fits the stroller seat, not a second car seat.

